Home Blog Understanding Phono and Line Switch on Turntables

Understanding Phono and Line Switch on Turntables

Turntables come with a few different connections. These include phono and line switches. We will help you understand these terms and why they’re important to your turntable setup.

Turntables are simple devices that allow music enthusiasts to play vinyl records. But what do some of the features mean? This blog post will focus on two specific features: phono and line switch. Both switches sit beside each other, with “phono” being closer to the ground while “line” is higher. Understanding these two switches allows you to understand how a turntable works and make informed decisions about which one you want for your home or office.

Explaining phono & line inputs

Phono Input

Line: Connects the audio source to the preamp or power amplifier (depending on what kind of sound system is used). Line outputs are typically unbalanced, meaning that they have one single cable carrying both left and proper audio channels. Phono: Often called ‘RCA’ plugs, these connect from the turntable’s output to an input on a stereo receiver or integrated amplifier. The advantage of using phono connectors is that it sends electrical signals straight through without any interference, so there’s less chance for distortion in your signal chain.

Many people are confused by the different terms used to describe audio equipment. For example, phono is an input or output term, while line refers to the transmitted signal type. Understanding these distinctions will help you make sure your equipment is set up correctly.

The difference between phono and line

Turntable Setup

The switch on the back can adjust the tone and volume of a turntable. This is called a line switch and will usually have two settings: phono, which is for use with a traditional FM radio, and line, which allows you to connect your turntable to an amplifier or receiver. You may need to adjust this setting depending on what type of music you are listening to – for example, if you listen mostly to vinyl records, then it’s recommended that you leave this set at “phono.”

When it comes to turntables, there are two different types of connections: phono and line. A phono connection is made with a cable that has an RCA plug on each end. You can use this type of connection to play vinyl records through speakers or listen using headphones. Line connections are for playing music from your computer or other audio devices, like CDs, iPods, MP3 players, etc. The main difference between the two is the sound quality – if you want the best possible sound, then you need to connect your turntable up to speakers via a phono input or use headphones for better sound isolation.”

Suggested articles

If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.